Pattern: none
Fabric: a 100% wool knit Dutch army sweater
Haberdasheries: none
Yes, finally I’ve got a WLA jumper! (And finally my uniform contains one
piece that is actually my colour! :P) In my opinion this is one of the
hardest WLA uniform pieces to obtain, because there are no good reproductions
available. Some web shops do offer them, but unfortunately the only thing
they’ve got in common with the real thing is that they’re green and sometimes
ribbed. However, they’re always made of cotton whereas original WLA sweaters
were made of wool (and I know which I prefer for re-enactment events as well!),
and even if they’re ribbed, the rib used is not the same at all.
So I’d been thinking about how I was going to make a good WLA jumper.
There were hand knitting patterns for them at the time, but I didn’t feel like
knitting one because frankly, an entire sweater in k1p1 is just boring! Then my
husband mentioned he had an old Dutch army sweater lying around that he wasn’t
using anymore, and it turned out to be 100% superwash wool and exactly the
right fisherman’s rib!
This is what the sweater looked like, nice Dutch flag and all :P:
I removed the stitched on cotton pieces and took the jumper apart, then
sewed it back together, making it much smaller. Luckily, as the army sweater
was too long anyway, I could omit using the part of the body which had the
shoulder pieces, as the stitching left dents which even blocking didn’t remove.
This was also the case with the sleeves, but I couldn’t avoid using those bits.
Creating the v-neck collar took the most effort. I carefully took off
the collar, threading all its loops with scrap yarn, then made the v-shape and
hand sewed the collar onto the jumper, taking care to reattach each loop.
And then all that had to be done was dyeing the jumper the correct shade
of green! I say ‘all’, but this took some experimentation. I had experience
with Dylon textile dye and although it isn’t meant specifically for wool
I assumed it would work. The packaging says that ‘lighter shades will be
achieved in wool’, so I thought I’d just add a bit more dye than specified. I
did several dye tests on leftover bits of the army sweater, using varying
ratios of Dark Green, Emerald Green and Tropical Green – and found that using
Dylon in a lighter, bright colour in order to add intensity doesn’t work at
all. Eventually I got a relatively bright green, but I had used so much Dylon
dye to achieve this in the sample that to dye the entire jumper would have
taken 50-70 euros worth of dye! Obviously that wasn’t an option, so I searched online
for dye that was meant specifically for wool, and came across STV Jaquard wooldye. I ordered one bag in the colour ‘vogelmuur’ (chickweed – heh,
that’s actually appropriate for the WLA in more ways than one!). 20 grams, that
was supposed to be more than enough to dye my 425 g jumper. I found that hard
to believe. Also, the fabric had to be heated to 98°C for the dye to work properly, and I assumed it would
felt, or at least shrink. But I used 1 gram of dye for another sample and it
came out the perfect colour, with seemingly no shrinkage!
 |
| My dye tests. Top left is the original colour of the army sweater, 1-4 are tests with Dylon and bottom right is the final test, using wool dye |
Dyeing the entire jumper with the wool dye was still a bit tricky
because the largest pan I own was only just big enough to fit the jumper and
enough water to cover it; it was a more cramped space than is usually the case
when I use Dylon in my sink and I couldn’t really stir the jumper properly, so
I was afraid it might end up with a slight tie-dye effect of more intense
colour in some places than others. Also, despite using a meat thermometer, the
pot accidentally started boiling. But despite all this, the jumper cane out
absolutely perfect! I’m quite astonished by the quality of this dye, how little
of it I needed and how even the result was despite the jumper being in the pan
all crumpled. I had hoped the original olive green of the army sweater could be
transformed to bright dark green, but I didn’t know this brightness would be
possible and any colour at least darker than olive would have been ok. So I’m
chuffed with this result =).
And here I am putting the jumper to the test at the archeological theme
park Archeon with my full WLA uniform!
 |
| Took the park’s flying broom for a spin… |
 |
And, why not, a glamour photo. Because the WLA offered a healthy,
happy job that did not involve 12+ hour days doing hard work in the mud, right?
|
If you want to read an interesting book about the WLA, I can recommend
this one:
